Cannabis Hardware FlowerPot F16 (TED-0006)
Technical Specifications
| Property | Specification |
|---|---|
| Manufacturer | Cannabis Hardware, LLC |
| Family | FlowerPot (wired ball-vape heater head) |
| Part Number | 7051 (Flowerpot F16 “Injector” Head Assembly) — confirmed live on the manufacturer’s Shopify product JSON, flowerpot-f16-head-assembly-7051.json, checked 2026-08-08 1 |
| Component Role (TREF-0004) | Heater head — machined thermal-mass body; mates with a 20 mm coil + external PID + 18 mm injector/Shovelhead bowl, all sold separately (not part of the head) |
| Release Period | 2023-06 – present 21 |
| Heating Method | Injector-style ball-assisted convection with machined cap and drop-in machined screen 1 |
| Heat Source | 20 mm exposed enail coil + external PID controller 1 |
| Temperature Control | PID set-point control |
| Temperature Range | 550–800 °F operating range per manufacturer FAQ; ≈560 °F recommended with 3 mm balls (per manufacturer product page) 13 |
| Chamber / Bowl | 18 mm injector bowls or titanium Shovelhead bowl 1 |
| Head Material | Grade 2 titanium (machined cap + drop-in machined screen) 1 |
| Thermal Media | ≈180 × 3 mm or ≈68 × 4 mm ruby balls (manufacturer product page: “About 180 3mm Rubies until full” / “About 68 4mm Rubies until full”) 1 |
| Compatible Media | Dry botanical flower 1 |
| Power | AC mains via coil + PID |
| Warranty | 1-year metal (metalworks), 30-day coil, 1-year controller; SiC/Sapphire/Quartz/Obsidian glass and dish products excluded; warranties non-transferable. This is the manufacturer’s general policy — no head-specific warranty terms are separately published 4. |
Revision Notes
- Rev A (2023-06-07): fixed head seating in the F16 machined cap (per manufacturer product page) 1.
- The F16 (injector) and F22 (diffuser) launched together in June 2023 as the fourth-generation FlowerPot heads 21.
Safety Notes
- Manufacturer safety instructions for the F16 state: do not operate above 700 °F, do not perform burn-offs, and do not leave the unit unattended while hot 1.
- The ruby balls must exceed the brim of the head for cap pressure; verify seating per manufacturer instructions 1.
Related Devices
- Manufactured by Cannabis Hardware, LLC.
- Sibling FlowerPot heads: B1, B0 / B-Zero, F22.
Sources
-
Cannabis Hardware, FlowerPot F16 head assembly product page (specs, Rev A 2023-06-07, ruby counts, safety warnings). https://www.cannabishardware.com/products/flowerpot-f16-head-assembly-7051 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13
-
Troy (420VapeZone), “New Flowerpot Ball Vape Heads: F16 and F22 vs B-Zero, B1 and B2” (June 5, 2023; updated June 7, 2023) — F16/F22 launch, injector-vs-diffuser design, bowl compatibility. https://420vapezone.com/f16-f22-flowerpot-ball-vape/ ↩ ↩2
-
Cannabis Hardware, Flowerpot FAQ (20 mm coil, 550–800 °F range). https://www.cannabishardware.com/pages/flowerpot-faq-page ↩
-
Cannabis Hardware warranty page (1-yr metalworks, 30-day coils, 1-yr controllers, glass/SiC/Sapphire/Quartz/Obsidian dish products excluded, non-transferable; no per-head terms published). https://www.cannabishardware.com/pages/warranty ↩
Derived navigation generated from structured relationships. Links are labeled by edge class and evidence trace; derived links are navigation, not primary assertions.