Cannabis Hardware FlowerPot B1 (TED-0004)
Technical Specifications
| Property | Specification |
|---|---|
| Manufacturer | Cannabis Hardware, LLC |
| Family | FlowerPot (wired ball-vape heater head) |
| Part Number | 7007 (Flowerpot B1 “Standard” Ball Vape Head) — confirmed live on the manufacturer’s Shopify product JSON, ball-vape-b1.json, checked 2026-08-08 1 |
| Component Role (TREF-0004) | Heater head — thermal-mass body holding the ruby balls; mates with a 20 mm coil + external PID + Shovelhead/injector bowl, all sold separately (not part of the head) |
| Release Period | Head (part 7007) listed by the manufacturer from 2021-10-20; the “FlowerPot B1 Standard Wired Ball Vape Kit” bundle listed separately from 2022-02-14 (Shopify created_at on each product record) 12 |
| Heating Method | Ball-assisted convection (high-airflow configuration) 1 |
| Heat Source | 20 mm enail coil + external PID controller (CH or Auber) 3 |
| Temperature Control | PID set-point control |
| Temperature Range | 550–800 °F operating range per manufacturer FAQ; model-specific recommended set points 3 |
| Chamber / Bowl | Titanium Shovelhead bowl (14 mm / 18 mm connection posts) or compatible injector bowls 1 |
| Head Material | Grade 2 titanium, 19 drilled air-inlet holes (per manufacturer) 1 |
| Thermal Media | 3 mm or 4 mm ruby balls — size confirmed on the manufacturer’s head product page (“Houses 3mm or 4mm ruby balls”) 1. Ball count not manufacturer-published — Unverified. A third-party reviewer (Troy, 420VapeZone) reports “The B1 holds 60 4mm balls or 100 of the smaller 3mm rubies” — a secondary, reviewer-measured figure, not a manufacturer specification 4. |
| Diffuser (component) | 22 mm Screen Diffuser, part 3408 — sold separately. The manufacturer states the B1 head “is perfectly optimized to work seamlessly with the 22mm Screen Diffuser, securely holding the balls within the sub-assembly” 1. This is the part the manufacturer briefly sold under its own name as the “Screen Baller”; it is a component and holds no device record (rule TAX-06) 5. |
| Compatible Media | Dry botanical flower only (flower-only configuration; no concentrate dish) 61 |
| Power | AC mains via coil + PID |
| Warranty | 1-year metal (metalworks), 30-day coil, 1-year controller; SiC/Sapphire/Quartz/Obsidian glass and dish products excluded; warranties non-transferable. This is the manufacturer’s general policy — no head-specific warranty terms are separately published 7. |
Revision Notes
- Rev D (2023-09-01): integrated machined screen replaced the previous screen assembly (per manufacturer product history) 6.
- The B1 shares the third-generation FlowerPot lineage with the B2; the B2 (discontinued; no date manufacturer-published) was the dual-use variant with a concentrate dish 68.
Safety Notes
- Manufacturer product pages warn against leaving a hot head unattended; the heated assembly is a burn hazard until fully cooled 9.
- Do not exceed manufacturer-recommended operating temperatures; overheating can damage the head assembly 9.
Related Devices
- Manufactured by Cannabis Hardware, LLC.
- Sibling FlowerPot heads: B0 / B-Zero, F16, F22.
Sources
-
Cannabis Hardware, Flowerpot B1 “Standard” Ball Vape Head product page (part 7007) — Grade 2 titanium, 19 drilled holes, 14/18 mm posts via Shovelhead bowl, flower-only, “Houses 3mm or 4mm ruby balls” (no count stated), Shopify
created_at2021-10-20. https://www.cannabishardware.com/products/ball-vape-b1 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 -
Cannabis Hardware, FlowerPot B1 Standard Wired Ball Vape Kit product page — bundle SKU built around the part-7007 head; Shopify
created_at2022-02-14; “ships with 3MM rubies as of 6/6/23”; Rev D note. https://www.cannabishardware.com/products/flowerpot-b1-ball-vape ↩ -
Cannabis Hardware, Flowerpot FAQ (20 mm coil, 550–800 °F range). https://www.cannabishardware.com/pages/flowerpot-faq-page ↩ ↩2
-
Troy, “Flowerpot B1 Review,” 420VapeZone (last updated 2024-05-10) — independent reviewer-reported ball capacity (“The B1 holds 60 4mm balls or 100 of the smaller 3mm rubies”); secondary source, cited only for this attributed figure. https://420vapezone.com/flowerpot-b1-balleater/ ↩
-
Cannabis Hardware, “22mm ‘Standard’ Diffuser (3408)” product page — the part sold as the “Screen Baller” in 2021 and as the “22mm Baller Diffuser” thereafter; the original
screen-baller-3408URL 301-redirects here (checked 2026-08-08). https://www.cannabishardware.com/products/22mm-vaporizer-diffuser ↩ -
Cannabis Hardware, “The Evolution of the FlowerPot Ball Vapes” (B1 lineage, Rev D 2023-09-01; this blog does not state a B1 ball count — see 1 for the head’s own product page). https://www.cannabishardware.com/blogs/desktop-vaporizer/the-evolution-of-the-flowerpot-ball-vapes ↩ ↩2 ↩3
-
Cannabis Hardware warranty page (1-yr metalworks, 30-day coils, 1-yr controllers, glass/SiC/Sapphire/Quartz/Obsidian dish products excluded, non-transferable; no per-head terms published). https://www.cannabishardware.com/pages/warranty ↩
-
Cannabis Hardware, FlowerPot B2 bundle product page (discontinued; SiC/sapphire dish). https://www.cannabishardware.com/products/flowerpot-vaporizer-b2-bundle ↩
-
Cannabis Hardware, F16 product page safety warnings (do not leave unattended while hot; do not exceed temperature limits). https://www.cannabishardware.com/products/flowerpot-f16-head-assembly-7051 ↩ ↩2
Derived navigation generated from structured relationships. Links are labeled by edge class and evidence trace; derived links are navigation, not primary assertions.